Durum Göstergesi
  • Positioning Systems -CM76/CM77
  • Positioning Systems-CM72/CM73/CM74

    ENCODERLER
  • Absolute Magnetic Encoders-RM22
  • Incremental Rotary Encoders-E30/E31 - E30H/E31H
  • Incremental Rotary Encoders-E320/E321 - E320V/E321V
  • Incremental Rotary Encoders-E40/E41 - E40H/E41H
  • Incremental Rotary Encoders-E400-E401 E470-E471
  • Incremental Rotary Encoders-E410/E411
  • Incremental Rotary Encoders-E520/E521 RE531/RE531
  • Incremental Rotary Encoders-E540/541 RE540/541
  • Incremental Rotary Encoders-E620/E621
  • Incremental Rotary Encoders-SE - SEB - SEB-Z
  • Wire Encoders-HLS/HPS

    LİNEAR CETVELLER
  • Linear Incremental Transducers-PD - PE
  • Linear Magnetic Transducer-TM+MP200
  • Linear Potentiometers -PLS - PL2S - PL231 - PM - PM2S

    PLC Kontroller
  • Motion Control, PCs, PLCs-CM140
  • Motion control, PCs, PLCs-Lynx
  • Motion Control, PCs, PLCs-Nexus
  • Motion control, PCs, PLCs-Vega

    Sayıcılar ve indikatörler
  • Counters and Visualizers-CM6
  • Counters and Visualizers-CM78
  • Counters and Visualizers-VD3
  • Counters and Visualizers-VD4
  •  

    Durum Göstergesi


    Positioning Systems-CM72/CM73/CM74
    Single Axis Counters/Positioners
    CM 72 - CM 73 - CM 74 are a series of microprocessor instruments which, thanks to their versatility, find a
    lot of possible employments in the field of counting and positioning control: the large number of available
    application software can fulfil all particular requirements. Easy to install, immediately usable by the operator
    and equipped with a full technical documentation support CM72, CM73 and CM74 can be supplied
    either in the positioner version or as multipreset counters.


    Positioning Systems -CM76/CM77
    Single Axis Counters/Positioners

    CM76 - CM77
    Microprocessor Counters/ Single-Axis Positioners
    • Supply: 115/230Vac or 24Vac, 50/60Hz - to be defined in the order
    • Standard input 12V, encoder supply 12V - On request: 5V input, encoder supply 5V (type X01)
    • Case dimension: CM76 mm 144 x 72 x 135 mm - display digits h. 8 mm CM77 mm 144 x 144 x 135 mm - display digits h. 12 mm


    Başa dön   
     

    ENCODERLER


    Incremental Rotary Encoders-E30/E31 - E30H/E31H
    Encoder rotativi incrementali miniaturizzati con impulso di zero (E31/E31H) o senza (E30/E30H). Il numero di impulsi
    al giro disponibili varia tra 2 e 500 per la serie E30/E31 e tra 1000 e 3600 per la serie E30H/E31H ad alto numero di
    impulsi. Costruiti sulla base di un’elettronica compatta ed innovativa, abbinano precisione ed affidabilità alle piccole
    dimensioni ed a un ottimo rapporto prezzo/prestazioni.

     


    Incremental Rotary Encoders-E40/E41 - E40H/E41H
    Encoder rotativi incrementali miniaturizzati con impulso di zero (E41/E41H) o senza (E40/E40H). Il numero di impulsi
    al giro disponibili varia tra 2 e 500 per la serie E40/E41 e tra 1000 e 3600 per la serie E40H/E41H ad alto numero di
    impulsi. Costruiti sulla base di un’elettronica compatta ed innovativa, abbinano precisione ed affidabilità alle piccole
    dimensioni ed a un ottimo rapporto prezzo/prestazioni.


    Incremental Rotary Encoders-SE - SEB - SEB-Z
    Encoder rotativi incrementali monodirezionali (SE) e bidirezionali con senza o senza impulso di zero (SEB/SEB-Z).
    Affidabili, precisi con caratteristiche meccaniche tali da consentirne l’impiego anche nelle condizioni più gravose.
    Incremental rotary encoders, monodirectional (SE) or bidirectional (SEB), with (SEB-Z) or without zero pulse.
    Accurate and reliable, their stout mechanical features make them fit to applications even in very harsh conditions.

     


    Incremental Rotary Encoders-E320/E321 - E320V/E321V
    Encoder rotativi incrementali miniaturizzati con impulso di zero (E321) o senza (E320), disponibili anche
    con attacco a vite (serie E320V / E321V). La tecnologia costruttiva utilizza un’elettronica compatta ed
    innovativa che consente di ottenere prestazioni elevate a costi contenuti, piccole dimensioni e grande affidabilità.


    Incremental Rotary Encoders-E400-E401 E470-E471
    Encoder rotativi incrementali con giunto per montaggio diretto sull’albero di un motore. Disponibili con o
    senza impulso di zero,con flangia diametro 58 mm (serie E400/E401) oppure 72 mm (serie E470/E471).
    La tecnologia costruttiva utilizza un’elettronica compatta ed innovativa che consente di ottenere prestazioni elevate e grande affidabilità a costi contenuti.


    Incremental Rotary Encoders-E410/E411
    Encoder rotativi incrementali con albero cavo - foro Ø 15 mm per montaggio diretto sull’albero di un motore.
    Disponibili con (E411) o senza impulso di zero (E410). La tecnologia costruttiva utilizza un’elettronica compatta ed
    innovativa che consente di ottenere prestazioni elevate e grande affidabilità a costi contenuti. Conformi a norme.


    Incremental Rotary Encoders-E620/E621
    Encoder rotativi, con o senza impulso di zero, a flangia quadra, compatibili con la serie normalizzata internazionale SIZE25,
    oppure con musone di centratura diametro 50 mm (serie E650/651). La tecnologia costruttiva utilizzata, abbinata ad
    un’elettronica compatta ed innovativa, consente di ottenere prestazioni elevate a costi contenuti.


    Incremental Rotary Encoders-E520/E521 RE531/RE531
    Encoder rotativi, con o senza impulso di zero, predisposti per montaggio di tipo servo, compatibili con la serie
    normalizzata internazionale SIZE23; disponibili anche con flangia standard tipo RE0444 (tipo RE530).
    La circuiteria elettronica estremamente compatta si combina al meglio con la meccanica testata ed affidabile,garantendo eccellenti risultati in termini di precisione e durata.


    Incremental Rotary Encoders-E540/541 RE540/541
    Incremental rotary encoders, with or without zero pulse, with 58 mm diameter round flange, 36
    mm diameter centering mask and 3 M4 fixing holes on diameter 48 mm.
    The compact electronic circuitry joins perfectly with the reliable and thoroughly tested
    mechanical construction, allowing to keep a favourable price/performance ratio


    Absolute Magnetic Encoders-RM22
    Single-turn absolute magnetic encoders
    One single diametraly polarised magnet activares the Hall sensors integrated in the ASIC.
    Absolute-Binary Parallel or Synchro Serial, Incremental-Qudrature or Sin/Cos signals are available
    on the encoder outputs. Electronics is incorporated in aluminium housing with high IP ratings.
    Stainless steel magnet carrier is mounted on 6 mm shaft diameter.


    Wire Encoders-HLS/HPS
    Il trasduttore è costituito da un encoder rotativo incrementale bidirezionale movimentato, attraverso un apposito meccanismo,
    da un filo in acciaio inox con copertura in nylon, che fuoriesce dal trasduttore. L’encoder fornisce un numero di impulsi
    proporzionale allo spostamento lineare del filo. La molla interna di richiamo riporta il filo nella posizione di partenza.
    La costruzione robusta e la facilità di installazione rendono il trasduttore particolarmente adatto alle applicazioni industriali
    dove sono richieste misure di precisione e di lunghezza sino a 5 metri. Applicazioni tipiche sono, per esempio: tavole X-Y,
    cilindri idraulici e pneumatici, macchine confezionatrici, macchine per la lavorazione di legno, marmo, lamiera ecc.

    Başa dön   
     

    LİNEAR CETVELLER


    Linear Magnetic Transducer-TM+MP200
    The linear magnetic measuring systemTM+MP200 is composed by the magnetictransducer TM and the magnetic bandMP200: The transducer works contactless, releavingthe polarized fields of the magnetic bandand converting the measure into digitalsignals.

     


    Linear Incremental Transducers-PD - PE
    Optoelectronic reading on graduated scale
    Reading resolutions: 0.1 - 0.05 mm - 0.01 mm - 0.005 mm
    Protection degree: IP65
    Strokes from 60 to 750 mm
    Easy mounting method



    Linear Potentiometers -PLS - PL2S - PL231 - PM - PM2S
    They change the mechanical linear motions into the corresponding eletrical signals
    Several mechanical and electronic versions available
    Mounting fittings available (spring device, ball joint, feeler pin, out-of-alignement joint)
    20 million motions
    Easy mounting by movable feet or ball joints
    Electrical connections by freely orientable connector
    Protection degree: IP65 (series PLS, PL2S, PL231) IP63 (series PM, PM2S)
    Strokes from 25 to 950 mm


    Başa dön   
     

    PLC Kontroller


    Motion Control, PCs, PLCs-Nexus
    2-4 Axes Multi-function Controller with Embedded PLC.

    Engineered to simplify the programming operations of the work cycles for the processing machines of all manufacturing fields,
    NEXUS joins the functional flexibility of the PLC with the absolute novelty of its interface completely programmable by the user by
    means of NEXUS-Wintools, a software developed by ELAP.
    The storable data structures with indexed access (receipts) allow to fit the configuration of the user interface to the most different application requirements.


    Motion control, PCs, PLCs-Lynx
    1-2 Axes Multi-function Controller with Embedded PLC

    Engineered to make the control of work cycles on processing machines easy and efficient, LYNX avails on a PLC allowing
    to integrate it perfectly into the handling system.
    Thanks to the storable data structures with indexed access (recipes) the program storing and recalling results extremely
    simple. A series of tasks and programs specially created for the execution of mathematical and graphic functions are available
    on request.
    The peculiar technology applied to keyboard construction allows to obtain customized versions even in limited series.





    Motion control, PCs, PLCs-Vega
    1-2 Axes Multi-function Controller with Embedded PLC
    The small-sized, powerful and versatile controller VEGA runs the automatic operation of machines and production systems in all
    industrial sectors. Besides the usual logical, timing and counting operations the inside PLC performs a series of complex operations,
    thus allowing to engineer elaborated applications in a simple and direct way.
    The Integrated Development Environment ELAP CM STUDIO for the creation of the PLC program and of the user interface allows to
    configurate the graphical display with icons, backgrounds and animation.
    Thanks to the high protection degree on the front case (IP65) VEGA can be used in severe industrial environments.


    Motion Control, PCs, PLCs-CM140
    1-2 Axes Positioner with Embedded PLC
    CM140 is intended to meet the needs of manufacturers of working equipment for the most different
    materials (steel sheet, wood, glass, marble, leather…) desiring to avail of machine cycle control
    equipment of simple use, cheap, having provisions for expansions and which can be easily integrated
    with other control devices.

    Başa dön   
     

    Sayıcılar ve indikatörler


    Counters and Visualizers-CM78
    Microprocessor Counter/Visualizer
    Combined to appropriate transducers (encoders or PD linear transducers), CM78 solves all problems tied to counting and
    displaying of length or tickness measure, as well as of machined pieces number, which can arise on any type of manufacturing
    machine. CM78 offers several different application possibilities: in addition to all machines performing cuttings or machining at
    a preset size, CM78 can be applied in various sectors, from the food sector (e.g. machines for pasta plants to predermine the
    quantity of product to work), to the wood sector (e.g. honing machines to check the panel thickness), from steel sheets (e.g.
    presses to display the ram position or benders to indicate distance between rollers), to the glass (e.g. grinding machines for thickness control), marble (e.g. edge polisher to preset the operation
    of one head), to the fabric sector (e.g. finishing machines for meter
    counting with total and partial count).


    Counters and Visualizers-VD4
    Microprocessor Digital Readouts

    Vcc One voltage channel input range ±2Vdc ±20Vdc ±200Vdc
    Vcc2R One voltage channel and two relay outputs
    Lq Input by potentiometer with resistance 1 to 20 KOhm
    Lq2R Input by potentiometer with two relay outputs
    Icc One direct current input channel, input range ±20mA ±200mA ±2A
    Icc2R One direct current input channel and two relay outputs
    Ica2R One alternate current input channel, input range 2A, and two relay outputs
    F Tachometer with digital input. Max frequency 10 KHz



    Counters and Visualizers-VD3
    Digital Readouts
    Digital readouts series VD3 can be employed in any industrial environment where it is necessary to measure voltage and currents,
    speeds, angular or linear positions and any physical or chemical magnitude that can be transformed into an electrical
    signal. There are several versions available, indeed:


    Counters and Visualizers-CM6
    Microprocessor Counter
    6-digit microprocessor counter, 2 presets
    All functions can be programmed by means of codes
    Functions selection: up-counter or down-counter
    Count mode selection: bidirectional x1, x2, x4 or monodirectional x1, x2 or input by electromechanical contact
    Operating cycle selection: single cycle with solid state output, single cycle with settable time outputs, repeating cycle with 1 or 2 time outputs
    Decimal digits selection: 0 to 3
    2 outputs on relay switch contacts
    Data memory on EEPROM
    Reset/load function on terminal board
    Dimensions: 72x72x146 mm
    Supply: 230 or 115 or 24 Vac


    Başa dön