PHOTOELECTRIC AREA SENSOR-SL1 SERIES


Photoelectrıc Area Sensor SL1 Serıes
Short-circuit protection Incorporated
Response time 10ms or less (when the interference prevention is used, in Light state: 30ms or less, in Dark state: 13ms or less)
Indicators Emitter Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED lights up or blinks when the job indicator input is Low, lighting
pattern is selected by operation mode switch
Receiver Operation indicator: Red LED lights up when one or more beams are interrupted, but lights up
when two beams or more are interrupted in the double-beam-
interruption mode
Stable incident beam indicator: Green LED (lights up when all beams are stably received)
Job indicator: Orange LED lights up or blinks when the job indicator input is Low, lighting
pattern is selected by operation mode switch
Interference prevention
function Incorporated
Environ- mental resistance
Pollution degree 3(Industrial environment)
Protection IP62(IEC)
Ambient temperature -10 to +55 C(No dew condensation or icing allowed),Storage:-20 to +70 C
Ambient humidity 35 to 85% RH, Storage:35 to 85% RH
Ambient illuminance Sunlight:10,000 xat the light-receiving face
Incandescent light:3,000 x at the light-receiving face
EMC IEC 60947-5-2, Parts 7.2.6.1.2.3 or RFI>20V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Vlotage withstandability 1,000V AC for one min.between all supply terminals connected together and enclosure
Insulation resistance 20M¦¸,or more,with 250V DC megger between all supply
terminals connected together and enclosure
Vibration resistance IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude In X, Y and Z directions for 30 min
Shock resistance IEC 60947-5-2, Part 7.4.1 or 30g,11ms in X,Y and Z directions for six times each
Emitting element Infrared LED (synchronized scanning system)
Material Enclosure: Heat-resistant ABS, Len cover: Acrylic, Indicator cover: Acrylic
Cable 0.3mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2m long
Cable extension Extension up to total 100m is possible for both emitter and receiver with 0.3mm , or more,cable.
Pigtail type M8 pico 4pin+6¡å. cable
Connection type M8 pico 4pin
Weight Emitter: 70g approx., Receiver: 80g approx

Başa dön   
 
PHOTOELECTRIC AREA SENSOR-SL2 SERIES


Photoelectric Area Sensor-SL2 Series
SL2 SERIES PHOTOELECTRIC AREA SENSOR SPECIFICATIONS(DC)
Number of beam hannels 8 12 16 20 24 28 32
NPN output SL2-***N-8 SL2-***N-12 SL2-***N-16 SL2-***N-20 SL2-***N-24 SL2-***N-28 SL2-***N-32
PNP output SL2-***P-8 SL2-***P-12 SL2-***P-16 SL2-***P-20 SL2-***P-24 SL2-***P-28 SL2-***P-32
Sensing height 140mm- 220mm- 300mm- 380mm- 460mm- 540mm-620mm
Sensing range 5m
Beam pitch 20mm
Sensing object ¦Õ30mm or more opaque object
Supply voltage 10-30V DC
Emitter Job indicator ON 0.7W or less 0.8W or less 0.9W or less 1.0W or less 1.1W or less 1.2W or less 1.2W or less
Job indicator OFF 0.6W or less 0.7W or less 0.8W or less 0.9W or less 1.0W or less 1.1W or less 1.1W or less
Receiver Job indicator ON 0.7W or less 0.8W or less 0.9W or less 1.0W or less 1.1W or less 1.2W or less 1.2W or less
Job indicator OFF 0.6W or less 0.7W or less 0.8W or less 0.9W or less 1.0W or less 1.1W or less 1.1W or less
Output NPN output type:
NPN open-collector transistor
¡ñMaximum sink current : 100mA
¡ñApplied voltage :30 V DC or less (between output and 0V)
¡ñResidual voltage : 1.5V or less

PNP output type:
PNP open-collector transistor
¡ñMaxmum source current : 100mA
¡ñApplied voltage : 30V DC or less (between output and +V)
¡ñResidual voltage : 1.5V or less

Utilization category DC-12 or DC-13
Output operation ON when all beams are received (OFF when one or more beams are interrupted)
Short-circuit protection Incorporated
Response time 10ms or less ( 12ms or less when the interference prevention function is used )
Indicators Emitter Emitting indicator :Green LED ¡Á 2 ( light up during emission ; one LED lights up for Frequency A setting , both LEDs light up for
Frequency B setting )
Job indicator : Red LED ( lights up , blinks or lights off when the job indicator input is applied , selected by operation mode switch )
Receiver Operation indicator : Red LED ( lights up when one or more beams are interrupted )
Stable incident beam indicator : Green LED ( lights up when all beams are stably received )
Job indicator : Red LED ( lights up , blinks or lights off when the job indicator input is applied ,selected by operation mode switch )
¡ùWhen an excess current flows through the output , the stable incident beam indicator and the operation indicator on the
receiver blink simultaneously due to operation of the short-circuit protection circuit .
Interference prevention function Incorporated
Test-run function Incorporated
Environmental resistance Pollution degree 3 ( Industrial environment )
Ambient temperature -10 to +55¡æ ( No dew condensation or icing allowed ) , Storage : -10 to +60¡æ
Ambient humidity 35 to 85 % RH ,Storage : 35 to 85 % RH
Ambient illuminance Sunlight :10,000 at the light-receiving face , Incandescent light : 3,000 at the light-receiving face
EMC IEC 60947-5-2 ,Parts 7.2.6.1.2.3 or RFI >3V/m ( in 30-1000MHZ ) ,EFT>1KV , ESD >4KV ( contact )
Voltage with standability 1,000V AC for one min . between all supply terminals connected together and enclosure
Insulation resistance 20M¦¸, or more , with 250V DC megger between all supply terminals connected together and enclosure
Vibration resistance IEC 60947-5-2 , Part 7.4.2 or 10-55HZ , 1.0 mm amplitude in x , y and z directions for 30 min
Shock resistance IEC 60947-5-2 , Part 7.4.1 or 30g , 11 ms in x , y and z directions for six time each
Emitting element Infrared LED ( modulated )
Material Enclosure : Heat-resistant ABS , Lens cover : Polyester , Indicator cover : Acrylic
Cable 0.2mm2, 4-core cable , 3m long
Cable extension Extension up to total 25 m is possible for both emitter and receiver , with 0.2 m2, or more , cable

Başa dön   
 
PHOTOELECTRIC FIBER SENSOR-FQ SERIES


Photoelectric Fiber Sensor-FQ Serise
FQ SERIES PHOTOELECTRIC FIBER SENSOR SPECIFICATIONS
Type/Item NPN Output PNP Output
Supply voltage 10 to 30V DC Ripple P-P 10% or less
Power consumption Normal operation: 960mW or less(current consumption 40mA or less at 24V supply voltage)
ECO mode: 960mW or less(current consumption 25mA or less at 24V supply voltage)
Output NPN open-collector transistor
Max sink current:100mA
Applied voltage:30V DC or less
¡¤Residual voltage:1.5V or less
at 100mA
PNP open-collector transistor
Max source current:100mA
Applied voltage:30V DC or less
¡¤Residual voltage:1.5V or less
at 100mA
Output operation Light-ON or Dark-ON, selectable with jog switch
Short-circuit protection Yes
Response time 150¦Ìs or less, 250s or less, 2.0ms or less,selectable with jog switch
Display
4 digit LED display
Sensitivity setting
2-level teaching /Limit teaching/ Manual adjustment
Fine sensitivity
adjustment function
Incorporated
Timer function
Incorporated with variable ON-delay/OFF-delay/ONE- SHOT timer, switchable either effective or ineffective
Interference prevention
function
Incorporated(up to four fibers can be mounted adjacently)
Ambient temperature -10 ¡ãC to +55 ¡ãC
Ambient humidity 35 to 85% RH, Storage: 35 to 85% RH
Emitting element Red LED( modulated)
Material Enclosure: Heat-resistant ABS, Transparent cover: Polycarbonate, Switch: Acrylic
Weight 20g approx.

Başa dön   
 
PHOTOELECTRIC SENSOR-FB SERIES


Photoelectric Sensor-FB Series
FB SERIES PHOTOELECTRIC SENSORS SPECIFICATIONS(AC)
Part model Without timing delay With timing delay
Light Source LED Visible red 660nm
Indicator LED Green: Power Yellow: Output Red: Margin
Response Time SPDT EM Relay output: 15ms Solid State Isolated N.O. output: 2ms
Supply Voltage 12-240V DC/24-240V AC
Output Type SPDT EM Relay or Solid State Isolated N.O.
Max. Load Current SPDT EM Relay: 10A at 120VAC, 5A at 240VAC, 10A at 28VAC Solid State Isolate N.O. : 300mA at 240V DC/AC
No Load Current <30 mA
Max. Leakage Current SPDT EM Relay: 0 ; Solid State Isolate N.O. : 1mA at 240VAC
Operation Mode Light or dark switching delectable via switch
Housing Material Glass fiber reinforced plastic
Lens Material Acrylic
Cover Gasket Material Neoprene
Enclosure Rating IP67
Circuit Protection -
Time Options - No delay, On delay, Off delay, One-shot
Time Settings - Adjustable, 0.1...15 s
Ambient Operating Temperature -25...55 C
Storage Temperature -40...70 C
Relative humidity 5% to 95%
EMC IEC 60947-5-2, Parts 7.2.6.1. 2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Voltage With Stand Ability IEC 60947-5-2, Part 8.3.3.4 or 1500VAC for one min, between all supply terminals connected together and enclosure
Insulation Resistance >20M¦¸ , with 1500V AC megger between all supply terminals connected together and enclosure
Vibration Resistance IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x , y and z directions for 30 min
Shock Resistance IEC 60947-5-2, Part 7.4.1 or 30g, 11ms in x , y and z directions for six time each

Başa dön   
 
PHOTOELECTRIC SENSOR-FM SERIES


Photoelectrıc Sensor-FM Serıes
Construction Reinforced thermoplastic polyester housing, totally encapsulated, o-ring sealing, acrylic lenses, and stainless screws.
Adjustments LIGHT/DARK OPERATE select switch, and 15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometers (clutched at both ends of travel). Both controls are located on rear panel of sensor and protected, clear acrylic cover.
Indicators Red indicator LED on rear or sensor is on when the load is energized
Environmental rating IP67
Operating Temperature Temperature: -20C to +70C, Maximum relative humidity: 90% at 50C
EMC IEC 60947-5-2, Parts 7.2.6.1. 2. 3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, SD>4KV(contact)
Voltage Withstand Ability IEC 60947-5-2, Part 8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure
Insulation Resistance >20M¦¸ , with 500V DC megger between all supply terminals connected together and enclosure
Vibration Resistance IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x , y and z directions for 30 min
Shock Resistance IEC 60947-5-2, Part 7.4.1 or 30g, 11ms in x , y and z directions for six time each

Başa dön   
 
PHOTOELECTRIC SENSOR-FR SERIES


Photoelectrıc Sensor-FR Series
Supply Voltage 10 to 30V DC Ripple P-P 10% or less
Current consumption 30mA or less
Output NPN output type: _NPN open-collector transistor, Applied voltage: 30V DC or less, Maximum sink current: 150mA Voltage drop: 2.5V or less

PNP output type:_ PNP open-collector transistor, Applied voltage: 30V DC or less , Maximum sink current: 150mA Voltage drop: 2.5V or less

Output operation Selectable either Light-ON Dark-ON by type number or by the control input wire
Short-circuit protection Yes
Reverse polarity protection Yes
Overload current protection Yes
Response time 1ms
Operation indicator Red LED (light up when the output is activated)
Pollution degree 3(Industrial environment)
Protection IP67(IEC)
Ambient temperature -25 to+55 ¡ãC
Ambient humidity 35 to 85% RH
EMC IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Voltage Withstand Ability IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure
Insulation Resistance >20M¦¸, With 500v dc megger between all supply terminals connected together and enclosure
Vibration Resistance IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min
Shock Resistance IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each
Emitting element Infrared LED Red LED Infrared LED
Material Enclosure: PBT
Cable cable 2m long with 3 or 4 conductors

Başa dön   
 
PHOTOELECTRIC SENSOR-FU SERIES


Photoelectrıc Sensor-FU Series
Output operation Switchable either Light-ON or Dark-ON
Short-circuit protection yes
Response time 1 ms or less
Operation indicator Red LED (lights up when the sensing output is ON)
Stability indicator Green LED (lights up under stable light received condition or stable dark condition)
Power indicator Red LED
(lights up when the power is ON) -
Sensitivity adjuster Continuously variable adjuster
Automatic interference
prevention function - Incorporated
(Two units of sensors can be mounted close together). -
Incorporated
(Two units of sensors can be mounted close togethe).
Environmental resistance
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature -25 to+55 ¡ãC , Storage:-30 to+70 ¡ãC
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Sunlight: 10,000 #x at the light-receiving face, Incandescent light: 3,000 #x at the light-receiving face
EMC IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)
Voltage Withstand Ability IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure
Insulation Resistance >20M¦¸, With 500v dc megger between all supply terminals connected together and enclosure
Vibration Resistance IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min
Shock Resistance IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting elementm Infrared LED (modulated) Red LED (modulated) Infrared LED (modulated)
Material PBT
Cable 0.2 mm2, 3-core (thru-beam type emitter: 2-core) oil resistant cabtyre cable, 2 m long
Cable extension Extension up to total 100 m is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).
Weight Emitter: 45 g approx., Receiver: 50 g approx. 50 g approx.

Başa dön   
 
PRESSURE SENSOR-PC SERIES


Pressure Sensor-PC Series
Analog
voltage
output Output voltage: 1 to 5V (over rated pressure range) Zero-point: within 1V 5% F.S. Linearity: within 1% F.S. Span: within 4V 5% F.S. Output impedance:1K¦¸ approx.

Analog bar display LED bar display in steps of 10% F.S. Approx.
Display 3.5 digit red LED display (sampling rate: 4 times/sec. Approx.)
Displayable pressure range 1.5 to -100.0kPa
0.015 to -1.020kgf/cm2. 0.015 to -1.000bar
0.21 to -14.50psi, 11.25 to -750mmHg
0.44 to -29.53inHg -1.5 to 100.0kPa
-0.015 to 1.020kgf/cm2
-0.015 to 1.000bar
-0.21 to 14.50psi -0.015 to 1.000MPa
-0.015 to 10.20Kgf/cm2
-0.015 to 10.00bar
-2.17 to 145.0psi
Operation
indication Comparative
output1 Orange LED (lights up when Comparative Output 1 is ON)
Comparative
output2 Green LED (lights up when Comparative Output 2 is ON)
Envir-

onmental-

resistance
Pollution
degree 3(Indrstrial environment)
Protection Standard, Flat and Light weight types:IP40(IEC),IP67 type:IP67(IEC)
Ambient
temperature -10 to +50¡æ (No dew condensation or icing allowed),Storage:-10 to +60¡æ
Ambient
humidity 35 to 85% RH, Storage: 35 to 85% RH
EMC Emission: EN50081-2, Immunity: EN50082-2
Voltage with
standability 1000V AC for one min. Between all supply terminals connected togethe and enclosure
Insulation
resistance 50M¦¸, or more, with 500V DC megger between all supply terminals
connected together and enclosure
Vibration
resistance 10 to 150Hz frequency, 0.75mm amplitude in X,Y and Z directions for two hours each
Shock
resistance 100m/s2acceleration (10G approx.) In X,Y and Z directions for three times each
Temperature
characteristics Over ambient temperature range -10 to +50¡æ: within+1% F.S. Of detected pressure at 20¡æ
Pressure
port Asian Standard, Flat and IP 67 types: Rc (PT) 1/8 female thread, Light weight type: M5 female thread
North
American Standard type:NPTF 1/8 female threed, Flat and Ip67 types: NPT 1/8 female thread
European Flat and Ip67 types: G (PF) 1/8 female thread
Material Front case: ABS, Rear case: pps (glass fiber reinforced ), Display surface: Acrylic
Pressure port attachment: Die-cast zinc alloy[ Light weight type: POM (glass fiber reinforce),
pressure port is brass( nickel plated)]
front cover(IP 67 type only): Polycarbonate
Cable 0.15mm - 5 - core oil resistant cabtyre cable, 2m long (IP 67 type: 5m long)
Pigtail type Pico 5 pins+6 cable
Cable extension Extension up to total 100m is possible with 0.3mm , or more, cable.
Weight Standard type: 95g approx., Flat type: 120g approx., IP 67 type:370g approx., Light weight type: 70g approx.
Accessories Hexagon-socket- head plug for pressure port: 1 No . (Standard type only), Pressure unit label: 1 NO .
Note: Model Nos. Of North American standard type having the suffix - P are PNP output type.

Başa dön   
 
PROXIMITY SENSOR-IQ SERIES


Proximity Sensor-IQ Series
IQ SERIES PROXIMITY SENSORS SPECIFICATIONS(DC)
Diameter DC(10-30V/10-55V) AC(20-250V) AC/DC(20-250VAC,50-60HZ;20-250VDC)
Q40 Q50 Q40s Q40 Q50 Q40s Q40 Q50 Q40s
Housing Material PBT RESIN PBT RESIN PBT RESIN
Operating Voltage
10-30VDC or 10-55VDC 20-250VAC 20-250 VAC, 50-60 Hz; 20-250 VDC
Ripple <10% - DC RIPPLE <10%
No Load Current <10mA or <20mA <2.5mA <2.5mA
Max. Load Current 200mA 400mA 200mA
Leakge Current <0.01mA 2.5mA <2.5mA
Surge Current - 5A(20ms) 2.2A for 20ms
Min. Load Current - 5mA 5mA
Voltage Drop <1.5V(10-30V)or<2.0V(10-55V) <8VAC AT 400MA <=10 VAC :<=8 VDC
Switching Frequency 100HZ <25HZ 25HZ AC; 40 Hz DC
Response Time 1ms/1ms 10ms/10ms 10ms/10ms
Switching Hysteresis <15%(Sr) <15%(Sr) <15% (Sr)
Repeat Accuracy <1.0%(Sr) <1.0%(Sr) <1.0% (Sr)
Protection Category IP67 IP67 IP67
Operating Temperature -25 C~+75 C -25 C~+75 C -25 C~+75 C
Temperature Drift <10%(Sr) <10%(Sr) <10% (Sr)
Short Circuit Protection YES - YES
Overload Trip Point 220mA - -
Time Delay Before Availability <10ms - -
EMC RFI>3V/m / EFT>1KV / ESD>4KV (contact) RFI>3V/m / EFT>1KV / ESD>4KV (contact) RFI>3V/m / EFT>1KV / ESD>4KV (contact)
Shock / Vibration IEC 60947-5-2,Part 7.4.1 /
IEC 60947-5-2,Part 7.4.2 IEC 60947-5-2,Part 7.4.1 /
IEC 60947-5-2,Part 7.4.2 IEC 60947-5-2,Part 7.4.1 /
IEC 60947-5-2,Part 7.4.2
Material Active Face PBT PBT PBT

Başa dön   
 
Single Output Switching Power Supply

15W,30W,50W,100W,240W
SP SWITCHING POWER SUPPLY SPECIFICATIONS(DC)
High frequency current suppress function
15W
30W 50W 100W 240W 240W
Efficiency 66%~84%(depend on different mode)
Input

conditions
Voltage
AC 100~240V(85~264) 100V(85~132V)/200V(170~264)switch 100V(85~132V)
/200V(170~264) 100~230V
(85~253)
Frequency 47~450HZ 47~63HZ
Voltage 100V input <0.45A
<0.9A <1.3A <2.5A <5.5A <4A
200V input <0.25A <0.6A <0.8A <1.5A <3.5A <2A
- >0.95A
Leakage
current 100V input <0.5mA
200V input <1mA
Rush
current 100V input <15A <25A
200V input <30A <50A
Noise filter Have
Output functions Voltage adjustable range +10%(V.ADJ)
Ripple <2%(p-p)
Input variable <0.5%(inputAC85~132V/AC170~264V,100%) <0.5%(inputAC85~132V/AC
170~253V,100%)
Load variable <1.5%(The rated voltage input 10~100% load))
Temperature <0.05%/ C(0~50 C the rated input & output.)
Starting time <100ms ( the rated input & output,
voltage arrival 90% load.) <200ms <300ms <1000ms
Holding time >20ms
Additional functions Over current protection 105~160%A(auto rest)
Over voltage protection Input shut down mode NO
Voltage shortage indication Color = RED NO
Voltage shortage output NO - - NO
Parallel operation NO 2
Others Ambient temperature
-10~ +60 C
Storage temperature
-25~ +65 C
Operation humidity
25~85%RH
Voltage resistance
AC 3.0kV 50/60Hz 1min(input)and(output)
AC 2.0kV 50/60Hz 1min(input)and(GR)
AC 1.0kV 50/60Hz 1min(output)and(GR)
Insulation resistance
>100M¦¸(output)and(input.GR)
Shock
10~55Hz 0.375 Amplitude at x.y.z axial for about 2h

10~55Hz 0.15mm amplitude
at x,y,z axial for 2h
Vibration
294m/S2 {30G} at 6 surfaces for three times
Output indicator
Green light
EMI
IEC-1000-3-2,3,FCC class B
EMC
EN61000-4-2,3,4,5,
Desire life
>8 years.
Weight <260g 380g <400g <600g <1800g <2200g

Başa dön